 (6).png)
 (2).png)
A trustworthy coating and blasting work depends on measurable checks at every stage of the process, from surface profile before blasting to dry film thickness after the final coat. Without accurate inspection data, even a well-executed coating job can fail early, leading to costly rework, warranty disputes, or non-compliance with project specifications. Blastcore Middle East supplies DeFelsko's complete range of inspection instruments, covering coating thickness, surface profile, environmental monitoring, adhesion, gloss, contamination, and hardness testing. Each instrument is designed for fast, repeatable measurement in demanding field and workshop conditions, and helps provide compliance with ISO, ASTM, SSPC, and NACE standards across industrial, marine, and oil & gas projects in Abu Dhabi and the wider UAE.
Blastcore Middle East offers these DeFelsko instruments individually or as pre-configured inspection kits, each suited to a specific stage of the surface preparation and coating process. Every gauge ships with a Certificate of Calibration traceable to NIST or PTB, and most models are IP65-rated to make sure weatherproof, dustproof, water-resistant performance on active job sites. Readings can be viewed, stored, and reported through DeFelsko's PosiSoft software ecosystem, giving inspection teams a consistent record across every stage of a project.
PosiTector 6000 Series
The PosiTector 6000 measures coating thickness on any metal substrate using interchangeable ferrous, non-ferrous, and combination probes, with cabled probes, microprobes, and Xtreme Series probes available for hot or rough surfaces. Standard models capture fast readings, 60 or more per minute, up to 90+ in FAST mode, and store up to 1,000 readings per probe on a large 2.8" impact-resistant color touchscreen. Advanced models go further, storing up to 250,000 readings from multiple probes across 1,000 batches and sub-batches, with three scan modes reaching 180+ readings per minute, plus Bluetooth and WiFi data transfer. Specialised probe options include a Duplex probe for measuring individual zinc and paint layers in a duplex coating system, and a Thick probe series for epoxy, rubber, and fireproofing coatings. These are useful for teams inspecting multi-layer protective systems on tanks, pipelines, and structural steel.
PosiTest DFT
A budget-friendly dry film thickness gauge for teams that need dependable readings without the full probe ecosystem. The Ferrous model measures non-magnetic coatings on steel. While the Combo model measures both non-magnetic coatings on steel and non-conductive coatings on aluminium, brass, and similar substrates, automatically recognising the substrate before taking a reading.
PosiTest PG
A destructive-method paint inspection gauge that measures individual coating layer thicknesses using a rotating cutting tip and a powerful 50x microscope with precision optics, ideal for coatings up to 1,250 microns (50 mils) thick, depending on the cutting tip used. Its durable anodized aluminium housing and rotating scale, marked in both Imperial and Metric units, make it a practical option for verifying multi-layer systems on any rigid substrate.
PosiTector 200 Series
Ultrasonic gauges for measuring coating thickness on wood, concrete, plastic, and fiberglass, capable of reading up to 7,600 microns (300 mils). The 200 B model is suited to wood and plastic, the 200 C model to concrete and fiberglass, and the 200 D model to thick, soft coatings such as polyurea. The proven non-destructive ultrasonic method conforms to ASTM D6132 and ISO 2808, and Advanced models can measure up to three individual layer thicknesses in a multi-layer system, with a graphic readout for detailed analysis.
Wet Film Gauges
Simple comb-style gauges for checking the thickness of wet paint, enamel, and other films quickly and accurately during application, before the coating has a chance to cure. These help applicators catch under- or over-application early.
PosiTest PC (Powder Checker)
A non-contact ultrasonic gauge for measuring uncured powder coating thickness and automatically calculating a predicted cured thickness. Improved sensor technology allows measurement on small tubes, odd shapes, and moving parts, with scan mode continuously taking readings across large areas and up to 4x faster measurement speed than previous models. These are useful for controlling powder consumption and reducing waste on production lines.
PosiTector UTG Series
Ultrasonic wall thickness gauges for steel, plastic, and other materials, with four probe types for different applications. Corrosion models (UTG C, CA, CX) measure the effects of corrosion or erosion on tanks, pipes, and structures where access is limited to one side, a common requirement in oil & gas inspection work. The Multiple-Echo model (UTG M) features Thru-Paint capability, reading metal thickness on a painted structure without removing the coating first. The Low Frequency model (UTG CLF) is designed for attenuative materials such as cast iron, while the Precision model (UTG P) delivers high-resolution readings on materials as thin as 0.125mm (0.005").
Testex Replica Tape & Digital Micrometer
Creates a physical replica of a blasted surface, which is then read using a digital or spring micrometer to determine surface profile depth. A range of conventional and optical grade tapes is available, and the Testex Digital Micrometer stores up to 250 readings with on-screen statistics, averaging, and conversion modes. Kits can include three tape grades (Coarse, X-Coarse, X-Coarse Plus) plus a High Accuracy Burnishing Tool with a spring-loaded ball that applies consistent pressure when creating the replica.
PosiTector SPG
Reads peak-to-valley surface profile directly on blasted steel, concrete, and textured coatings using an alumina wear face and tungsten carbide tip for long-term accuracy. Integral and cabled probe versions are available, and the SPG OS probe includes a V-groove and proprietary OD mode for measuring on convex surfaces. It helps verify the blast profile is within spec before coating starts.
PosiTector RTR
A digital spring micrometer that reads Testex replica tape and records surface profile parameters, using replica tape grade to automatically apply the correct conversion factor. 3D models use imaging sensors to measure peak height and up to fourteen common profile parameters such as Ra, Rz, Sq, and Spd, generating high-resolution surface data files for detailed reporting.
PosiTector DPM Series
Tracks relative humidity, air and surface temperature, dew point, and the difference between surface and dew point temperature, the exact parameters required by ISO 8502-4 before painting begins. Fast-response sensors provide repeatable readings, and SmartTrend indicators flag rising, falling, or stable conditions. Probe options include integral, cabled, infrared, and anemometer versions, with USB, WiFi, and Bluetooth connectivity, which are particularly useful given Abu Dhabi's high humidity and coastal conditions.
PosiTector DPM L / L+ (Loggers)
Unattended environmental loggers that automatically record datasets at user-selected intervals for up to 200 days (DPM L) or 600 days (DPM L+), storing up to 10,000 datasets internally. The L+ model adds automatic upload to PosiSoft.net and email alarms when readings exceed defined limits, both requiring a WiFi connection.
Infrared Thermometers
Non-contact surface temperature measurement for hot, moving, or hard-to-reach parts where conventional sensors won't work. These featuring selectable emissivity levels and a button-activated laser pointer for accurate targeting.
PosiTest AT-A / AT-M
Pull-off adhesion testers measuring coating bond strength on metal, wood, concrete, and other rigid substrates, with a self-alignment feature and pull rate indicator. The Automatic model (AT-A) uses a colour touchscreen and records pass/fail results along with fracture type, cohesion, adhesion, or glue failure. The Manual model (AT-M) offers a simpler, field-replaceable-battery alternative. Kit options include 20mm kits for higher bond strength coatings on metal, and 50mm kits for concrete, wood, and plastic substrates.
GLS Series
Measures gloss, reflectance, and haze using one, two, or three measurement angles depending on the finish, GLS 60° for most applications, GLS 20°/60° for high- to semi-gloss with haze calculation, and GLS 20°/60°/85° for high-, semi-, and matte-gloss finishes. Automatic diagnosis and calibration occur on power-on using an integrated tile, and Advanced models include two scan modes for quantifying large surfaces.
Soluble Salt Testers
Measures salt contamination on metal surfaces in accordance with ISO 8502-6 and 8502-9 using the Bresle method, with an intuitive step-by-step interface that automatically computes surface salt density. Displays test duration, sample temperature, conductivity, and surface density, a key check before blasting or coating in coastal and offshore UAE environments.
Shore Durometers
Measures the hardness of plastics, rubbers, thick coatings, and other non-metallic materials using Shore A or Shore D scales, with user-adjustable measurement time and auto-ignore mode to disregard out-of-range readings.
Barcol Hardness Impressors
Measures the hardness of soft metals such as aluminium, aluminium alloys, and copper, as well as harder plastics and fibre-reinforced plastic, an electronic alternative to conventional analog impressors.
High Voltage Holiday Detectors
Detects pinholes and coating discontinuities on metal and concrete substrates using pulsed or continuous DC technology, with adjustable voltage from 0.5 to 35kV and a built-in certified voltmeter. A wand-format version fits Li-ion batteries directly into the handle for reduced weight, with an optional extension rod for floors and hard-to-reach areas.
Low Voltage Pinhole Detectors
Uses a wet sponge method to detect holidays and discontinuities on coatings up to 500 microns (20 mils), with regulated voltage output options and adaptable sponge hardware for flat, roller, and custom applications.
Concrete Moisture Meters
Non-destructively measures moisture conditions in concrete slabs per ASTM F2659, with a Hold Max and Save mode that waits for the reading to stabilise before saving. An In-Situ model measures relative humidity and temperature in concrete floor slabs per ASTM F2170, connecting wirelessly to the PosiTector App.
PosiTest OTL
Simultaneously measures up to six temperatures using a variety of air and surface probes, housed in a thermally insulated stainless steel barrier box for long run times. Its Cure Index compares supplier cure specifications against actual oven and part temperatures to help provide a proper cure.
PosiSoft Suite
All DeFelsko gauges connect to the PosiSoft ecosystem for viewing, archiving, and reporting inspection data. PosiSoft Desktop offers offline data management with custom PDF report generation. The PosiTector App connects mobile devices to compatible gauges for on-site reporting. The PosiSoft USB Drive offers plug-and-play data retrieval with no software required, and PosiSoft.net provides secure cloud storage and synchronisation for teams managing inspection data across multiple sites.
The right inspection instrument depends on the substrate, the coating system, and the standard the job needs to meet. Blastcore Middle East supplies DeFelsko's full inspection range across Abu Dhabi and the UAE, backed by NIST/PTB-traceable calibration and the PosiSoft software suite for reporting and data management. Whether it's a single handheld gauge for routine checks or a complete inspection kit for a large-scale project, these instruments help to provide surface preparation and coating work is done right the first time, with documented results to back it up. Contact Blastcore Middle East to find the right DeFelsko instrument for your project, or request a quote for a full inspection kit.
